Skip to main content
F3D
Hộp rugged có chốt ẩn (print in place) 1

3 images

DIY

Hộp rugged có chốt ẩn (print in place)

By ungineering

Downloads
173
Likes
17
Views
666

Files 8 12.7 MB

  • box.stlSTL · 3.8 MB
  • top half.stepSTEP · 204.5 KB
  • bottom half.stepSTEP · 206.2 KB
  • box.stepSTEP · 413.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#187119
Category
DIY
Published
License
OCL

Description

Interior dimensions: 50mm x 75mm
Inner fillet radius: 8mm

IF YOU JUST WANT TO PRINT IT, USE box.stl DO NOT PRINT HALVES SEPARATELY!

Material: PLA, PETG, ABS, really any material should work. There is enough clearance in the hinge to prevent it from getting stuck.

Uses about 68g of filament.

Layer height: 0.2mm

Wall loops: 2

Supports: No

Infill: 20%

Printed as-is, the box can support at least 100kg when closed without cracking.

This is heavily inspired by https://www.printables.com/model/56071-parametric-rugged-box

However the original design did not print well in PLA for me and the clasp was very difficult to open. I redesigned this in OnShape. I also made the clasp hidden when closed, and added small handles to aid in opening.

To modify parameters, you have to use OnShape. Just change the variables in the model, then export the assembly: https://cad.onshape.com/documents/e1946af74b3ec519cf95aeaa/w/773e59c374bfef063256e68b/e/5d6981fdadbdc7ff73359050

Read more Show less

Print spec

Formats
stepstl
Model files
8
Total size
12.7 MB
Largest file
3.8 MB

0 comments

See all