Giá Đỡ Dây Điện Milwaukee Packout

Cable/Cord management system for the Milwaukee Packout. This attaches to the following Packout Tool Boxes:

• Rolling Tool Box
• Large Tool Box
• Tool Box

The image above shows a Carol Brand, Froghide Ultra Flex 50ft 12 gauge power cord.

You can attach the brackets to the aluminum extrusion with #8 1/2 inch self tapping metal screws.

I had to increase the size to be 103% (in the x and y dimensions) of the original on my CR-10 to fit properly. First layer Elephant's Foot can also be pretty problematic for fitting.

Ideally this should be printed in temperature resistant materials.

All trademarks are the property of their respective owners.

Print Settings

Printer Brand:

Creality

Printer:

CR-10

**Rafts:**

No

Supports:

Doesn't Matter

**Filament:** Hatchbox ABS

Notes:

I would recommend using ABS as the tool boxes will be stored in trucks or direct sunlight.

https://www.makeshaper.com/3d-printer-filament-comparison/
ABS glass transition zone: 105C.
PLA glass transtion zone: 60C.

I would also recommend that you increase the size of your file in your slicer by 103% in the x and y directions to ensure an easier fit around the aluminum extrusion. This will vary with your printer.

Category: Tool Holders & Boxes