Skip to main content
F3D
Hạt Khổng Lồ Cho Động Vật Hạt Khổng Lồ 1

3 images

Đồ Chơi Khác

Hạt Khổng Lồ Cho Động Vật Hạt Khổng Lồ

By BeardedPrinter

Downloads
153
Likes
52
Views
1,105

Files 1 2.3 MB

  • Large_Bead_1767192549.stlSTL · 2.3 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Feeling nostalgic?

Print and make your own giant bead lizard with this design of a giant bead!

Feel free to scale it down to a more reasonable size if you don't want to use so much filament.

The amount of filament used in pictures is ~4.4 KG of filament total (I bought 3 KG of pink and 2 KG of yellow). If you don't want to use that much, I recommend scaling the bead down a bit.

50 beads are required to make the lizard in the picture.

The following print recommendations are for the full sized giant bead. If you plan on scaling it down, some of the recommendations are no longer necessary.

  • 0.6 mm nozzle or larger (All my beads were printed at 0.28 mm layer height with a 0.4mm nozzle, but each bead took a long time to print. Bigger nozzle is better)
  • Enable supports for overhangs greater than 40 degrees. I used a fillet instead of chamfer to try to preserve the roundness of a typical bead. The supports will probably only support the bottom few layers, so there isn't a lot of waste there.

If you need help knowing how to put the lizard together, you can rest assured there are many resources online (google, youtube, etc) that can guide you in building your lizard.

Feel free to join my discord for additional support, questions, or suggestions!

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
2.3 MB
Largest file
2.3 MB

0 comments

See all