Miếng Chặn Bụi Cho Prusa Core One

The Core One has a crevice underneath the side panels where debris can collect. I created a wedge that fills this gap to prevent that.

Included is a wedge with no magnet cutouts and a few variations for common magnet sizes. If you use the one with no magnets, use Prusaslicer to create negative volume cutouts for whatever magnet size you like. It is recommend you use magnets to prevent the possibility of the wedges shifting and impeding the bed movement.

Printed 2 of them out of Overture TPU, 0.2 layer height, 25% gyroid infill, using the 6x3 magnets as they should be stronger. You will need cyanoacrylate glue for the round magnets, but the square should just slot in since they are encased.

If you do not use the 3mf or use a different stl file, you will need to adjust the orientation of the wedge to fit on a Core One build plate. Rotate the model 38.5 on the Z axis, and the X position should be set to 135, and Y position 102.