
Mồi Câu Crankbait / Wobbler Nặng 40 Gram
- Downloads
- 212
- Likes
- 51
- Views
- 1,513
- Remixes
- 0
- Comments
- 0
Files 3 3.9 MB
- Deriva_B1_Lip_1767168711.stlSTL · 156.8 KB
- Deriva_B1_Rechts_1767168712.stlSTL · 1.9 MB
- Deriva_B1_Links_1767168713.stlSTL · 1.9 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #184989
- Category
- Thể Thao & Ngoài Trời
- Published
Description
Instructions
1 - Print both halfs
2 - Insert 4x3 4mm lead BBs to the triangular lead holes
3 - Cut 3 pieces of Filament to use as alignment pins, insert them into the 3 alignment holes. Use epoxy glue to mate the two shells together
4 - Twist some wire ( i use tig filler rod ) to form the linetie and hook hangers
5 - use 5 min epoxy to glue in the hook hangers and line tie
6 - Hang the bait from the linetie and either brush on or dip the bait into UV curing resin, let it drip off so you only have a thin coat and cure it in the sun or under a UV light
7 - Sand the bait as smooth as you want. the resin already makes it near perfect, so minimal sanding is required
8 - Paint the bait to your likings, let the creativity flow, Glue 5mm 3d Eyes in the sockets
9 - clearcoat it either with another layer of clear UV resin or 2 part epoxy
10 - DONE, go out to your favourite spot and catch some pikes!
Design Process
This bait is based on a well known premium bait, works just as the original!
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 3.9 MB
- Largest file
- 1.9 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


