Hàm Kẹp Đế 70mm Cho Giá Đỡ Mô Hình

Remix of Đế Kẹp Mini Thu Nhỏ Để Vẽ By 3DPrintingDude

By Dmytro

Downloads: 107
Likes: 8
Views: 479
Remixes: 0
Comments: 0

Download all (.zip)· 8 files · 2 MB· 2 MB

Files 8 2 MB

jaws_inverted_70mm_base_1767165504.stepSTEP · 620.8 KB
jaw-1_inverted_70mm_base.step_1767165506.3mf3MF · 95.4 KB
jaw-2_inverted_70mm_base.step_1767165507.3mf3MF · 124.3 KB
jaw-3_inverted_70mm_base.step_1767165508.3mf3MF · 112 KB
jaws_inverted_removable_70mm_base_1767165508.stepSTEP · 707.5 KB
jaw-1_inverted_removable_70mm_base.step_1767165509.3mf3MF · 116.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #184939
Category: DIY
Published: 12/29/2025
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: jaws
70mm

Description

A set of jaws to hold miniatures with 70mm base diameter. There are two variants: one for the original chuck and the other, labeled removable, is to be used with Removable Jaws Mod.

Each jaw has a 0.2mm sacrificial layer of material in one of the grooves for printing stability. Print with that side down on the print bed.

In order to use with Removable Jaws Mod thread the jaws should be inserted in the following order 2-1-3.

The range of diameters of grippable round object is ~68-82mm (~68-90mm with Removable Jaws Mod).

Suggested print settings:
- Layer height: 0.2mm
- Supports: Paint on a bit of support for the tip of the jaw. Organic supports work great.
- Perimeter generation: Classic (not Arachne)