Các Bộ Phận In 3D Positron

Hi! I'm Nomad, GM/CEO of Positron 3D.

Figured I'd upload the files so that anyone who prefers printables could do so here. 

Please check the github for more up to date models.

ABS and ASA is recommended for all parts. - We hope to migrate this to “Brands” later.

Positron v3.2 Printed Parts

Hello - all of these folders are what is required to build your Postiron.

In each folder, you will find a readme, this will act as a general Key for the naming of the files, as well as a spot where we've added advisories for some parts. This is as simple as informing you if a part will not be seen from the exterior, if a part will be closely intact with a high temperature item such as a motor, or if a part is recommended to be non-conductive for electrical isolation.

Please note that the folders here are grouped by assembly, and not by recommended order of assembly. Please be sure to follow the guides provided on our wiki.

Material needed

• 198.51g for Primary
• 170.57g for Accent

Recommended Print Settings

•  We recommend printing all parts in ABS or ASA
•  We're copying Voron's homework
  • Layer height: 0.2mm
  • Extrusion width: 0.4mm
  • Infill percentage: 40%
  • Infill type: grid, gyroid, honeycomb, triangle, or cubic
  • Wall count: 4
  • Solid top/bottom layers: 5
  • Supports: NONE

ABS or ASA is the recommended filament for most parts, PLA and PETG can be used for many accent pieces, but please only do so at your own discretion.

Example Renders

Below are renders we generated. For reference between "Primary" and "Accent" colors;

 - Primary Colors; Extruder, Panels, Main Hotend Body

 - Accent Colors; Control Panel, Vents, End Caps.

 FILE NAME KEY:

Part Name - Quantity - Recommended Color - Notes

Example 1;

Bed_Cable_Guide - 1x - Accent  

This is the Bed_Cable_Guide, you need to print One of them, recommended in an accent color.

Example 2;

Z_PCB_Spacer - 1x - Any - Non-Conductive

This is the Z_PCB_Spacer, you need to print One of them, you can use any color, and must not be conductive.

Questions or Comments

Please feel free to join our Discord to help with any feedback. We appreciate any and all feedback that can help us better improve our designs.