PI4 với SSD Sled

Remix of the Pi4 sled to support a GeeekPi NVMe SSD card and POE Hat.

SSD Card can be found on amazon

Mounting:

1. Use the screws with the SSD card and run them through the mounting holes in the sled
2. use the threaded standoffs to mount the SSD Card to the sled
3. Place the Pi on top of the card (make sure the pogo pins are aligned, and use the standoffs from the POE hat to secure the pi
4. Mount the POE hat and use the hat's included screws to fix onto the standoffs.

Changes from original model:

• Lower pi standoffs by 0.5mm (improve clearance for POE hat)
• Create cutouts on the Sled for the USB connector and the SSD