Đế Cài Cần Câu Cá

no supports needed* - ends are replaceable!

I suggest printing 1 extension. Try not to stack too many extensions if possible - may cause holder to become unstable 

Print pegs and extensions with 4+ walls!

0.2mm tolerance between peg and holder

*Only one side can be printed flat on most parts- other side is curved 
Feel free to scale objects in slicer - parts may be smaller than expected. I found that 250% Scale works best with 1 extension. 

FORKS OF PRUSA SLICER MIGHT IMPORT .STLs AT A 10X SCALE
 

Larger scale will also have larger tolerances - 250% might need gluing (depending on if your printer accuracy is too good)