Móc Treo Quạt Gấp Gọn

Folding fursuit or wet-suit hanger with an integrated fan for quick drying and odor prevention.
The hook swivels and can be easily detached for storage.
Standard 5.5mm x 2.1mm barrel jack. 
Speed control knob for quieter operation at night, and longer run time if running from battery power.

I built this hanger because the other options on the market are significantly too bulky for my travel needs, and I didn't see any other fan integrated options available.

Onshape project link

All parts printable without supports, though depending on bridging settings it may be advisable to paint on supports for the front edge of the very long bridge.

I designed this for ABS, though I don't see any reason why other common materials wouldn't work.

Additional parts BOM:

Description

Qty

PN/Link

4-wire 60x60x38mm server fan (PN for reference, recommend salvage or Amazon)

1

PFR0612XHE-SP00 

4-pin fan connector

1

Amazon

5.5mmx2.1mm DC Power Jack

1

Amazon

Shoulder screws, 4 mm Shoulder Diameter, 4 mm Shoulder Length, M3 x 0.5 mm Thread

4

McMaster # 92981A741

M3 Heat-set inserts

7

McMaster # 94459A140

M3 x 15mm Bolts (14mm works)

1

McMaster # 91290A572

M3 x 12mm Bolts

2

McMaster # 91290A113

M-Rail swivel

1

Amazon

Fan controller

1

Amazon

Recommended additional pieces:

USB-C to 5.5x2.1mm barrel jack, fixed 12V power cable: Amazon

USB-C PD battery bank: Amazon

Hotel rooms never have outlets in the closet. This lets you run the fan without an outlet for many hours.

Questions: contact me through a link on https://fursona.directory/@Jam_Deer