Giá đỡ pin Bosch 18V All-in-One

Here is my battery holder for Bosch batteries 18V, they are for All-in-One system called “Bosch alliance”. They are not compatible with Bosch Pro series.

Warning - this is original design, was published on Thingiverse. Last days I found and reported one user that misused my design and claimed himself as an author. I am owner of original drawing (CAD) files, so I can proof my design rights.

Model also : https://www.thingiverse.com/thing:5642984

I must inform you also, that model have some 3D model integrity issues during slicing. I tested print with Creality slicer and with FlashPrint and both of them warn, fixed the issue and model is printable. On the side, there is a rig and you have to put here support!

Next is the thickness of part. It is not designed for direct mount on wall, because there are few milimeters remaining. But you can use spacers for your application. This design was caused and was sufficient for my tool panel with ribs, where I mount it.

Fourth thing is that holder is not requiring any force to pull up/down the battery. So is recommended to be used only in vertical position.