Skip to main content
F3D
Bánh răng hành tinh 22mm hoặc đồ chơi fidget 1

5 images

Đồ Chơi Khác

Bánh răng hành tinh 22mm hoặc đồ chơi fidget

By Dale_1082906

Downloads
139
Likes
17
Views
839

Files 11 34.3 MB

  • Part_Studio_2_-_Helical_0.7213M_24T_1767038195.stlSTL · 850.9 KB
  • Part_Studio_2_-_Spur_gear_6_teeth_11-00_Planet_1767038196.stlSTL · 1.6 MB
  • Part_Studio_2_-_Spur_gear_12_teeth_1767038197.stlSTL · 1.5 MB
  • Part_Studio_2_-_Spur_gear_6_teeth_0700_Planet_1767038198.stlSTL · 1.6 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

After seeing some of the gear bearings I was impressed with their designs.  So, I played with a few of my own.  Then I saw several models that needed 22x8x7 ball bearings, so I wondered if a working gear bearing could be made that small.  That resulted in this build.  It is 22mm in diameter and is 7mm wide.  I decided to make the center hole a 3mm hex.  Before printing, I thought I might need to reduce the line width but I was unsuccessful with adhesion with both PLA and PETG.  So, I went back to the defaults with a 0.4mm nozzle and PLA, with the textured PEI plate, and to my surprise it printed in both silver silk and white basic.  I did select to build with 100% infill which with this small a part, I am not sure it made any difference.  When I inserted the 3mm hex driver, gave a quick turn and they broke away without a hitch.  The second time I printed I used normal support with one layer of raft.  It made for a cleaner look and was easy to remove.

I would love to hear if anyone can modify their build to use these instead of ball bearings.  Please provide any details of different filaments and different settings.  I had already ordered a 0.2mm nozzle because I didn't think this would actually work.  I will probably try it with the smaller nozzle when it comes in.

Good luck and I hope to hear and see some results.

By the way, people have commented that is a fun fidget. Especially if you print it at 200 or 300%

1/30/2024: I added a 3MF, a STEP, and a STL file to add in printing or modifying.

Read more Show less

Print spec

Formats
3mfstepstl
Model files
11
Total size
34.3 MB
Largest file
12 MB

0 comments

See all