Giá đỡ kẹp băng chịu lực

This band clamp rack can be used for more than just holding your clamps, but the specific use I built it for was mounting my Merle clamps from MLCS. 

To mount it uses 4 Hillman's Wall Dog 1-½ inch Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States.

It features 2-½ inches of clamp room between flared mount and flared end. It is 3-½ inches squared at wall with rounded corners. The shaft is 1-½ inches thick. It has a distance from the wall of 3-3/16 inches. 

I made mine from Prusament PETG.