D Ring - Gated

By TheWhatBrandSG

Downloads: 166
Likes: 34
Views: 771
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 1.8 MB· 1.8 MB

Files 4 1.8 MB

dring-gated-nologo-thewhatbrandsg_1767021751.stlSTL · 131.9 KB
D_Ring_Gated_1767021752.3mf3MF · 55.3 KB
D_Ring_Gated_0.4n_0.2mm_PLA_MK4_11m_1767021753.gcodeGCODE · 803.2 KB
D_Ring_Gated_0.4n_0.2mm_PETG_MK4_12m_1767021755.gcodeGCODE · 809.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #182500
Category: Trang Phục - Phụ Kiện
Published: 12/28/2025
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: diy
travel
upgrade
customized
backpack
strap
hardware
molle
gate
upgrades
25mm
mollesystem
nylon
webbing
dring
twb
customised
polyester
gated
whatpack
packware

Show more tags Show fewer tags

Description

Suggested print settings for PLA:

Layer height 0.2mm.
Infill 80-100%.
Perimeters: 5 (for strength).
No supports needed.
Optional: Enable Ironing (for better surface results)
- Flow Rate: 15% (default).
- Spacing between ironing passes: 0.1mm (default).
- Ironing Type: All top surfaces (default).

Suggested print settings for PETG:

Layer height 0.2mm.
Infill 80-100%.
Perimeters: 5 (for strength).
Brim Width: 3mm.
Brim Separation Gap: 0.45mm.
No supports needed.
Optional: Enable Ironing (for better surface results)
- Flow Rate: 15% (default).
- Spacing between ironing passes: 0.1mm (default).
- Ironing Type: All top surfaces (default).

Explore other backpack accessories HERE.

NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.