Skip to main content
F3D
Apple TV 4K Mount - Wall/TV Stand 1

3 images

Đồ Gia Dụng

Apple TV 4K Mount - Wall/TV Stand

By brahoy

Downloads
2,729
Remixes
2

Files 4 9.9 MB

  • Apple_TV_4K_Mount_0.2mm_PETG_MINI_5h13m_1766963646.gcodeGCODE · 4.6 MB
  • Apple_TV_4K_Mount_0.2mm_PETG_MK3S_5h11m_1766963647.gcodeGCODE · 4.7 MB
  • Apple_TV_4K_WallTV_Mount_V2.2_1766963644.stlSTL · 530.6 KB
  • Apple_TV_4K_WallTV_Mount_V2.1_1766963644.stlSTL · 83.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Description

My Apple TV quickly accumulated dust while it was sitting under my TV. I wanted a holder that I could attach to either the wall, VEGA mounting brackets on the back of the TV, or use 3M Command Strips depending on where the TV and Apple TV were located. I originally searched but the options available were either too expensive or did not fit my needs. I decided to make my own; and why not, I had just received my very first i3 MK3S weeks before.

The Apple TV slides into the holder with appropriate clearance, has vents to allow for cooling, and a cable area on the bottom for HDMI, power, or LAN cables.

The original design has a center hole for mounting to a wall or TV stand. A later iteration uses a DIN mount to securely hold the Apple TV.

I print these in PETG and PLA with supports in place and then remove the supports. If you have a MMU2S, other multi-filament device, or a dual extruder machine, you could use dissolvable supports. I didn't find that necessary.

Read more Show less

Print spec

Formats
gcodestl
Model files
4
Total size
9.9 MB
Largest file
4.7 MB

0 comments

See all