Giá đỡ lon cho Skadis

A simple bottle holder that makes it easy to reach the bottles from your IKEA Skådis board. The bottle holder is available in four different sizes (50 mm, 55 mm, 60 mm and 67 mm).

Installation 

The bottle holder is mounted on the Skadis board using a T-nut that is made to fit M3 screws. T-nuts ensure a strong and secure hold and are easy to install and remove by using a screwdriver. There are two different versions of the bottle holder, one with countersunk holes and the other with flat holes, which one to use depends on the type of screw you are using. The screws that will fit should be about 15 mm in length.

Place the screw in the T-nut through the holes in the bottle holder and screw it in until the T-nut is about 2-3 mm from the back of the bottle holder, insert the T-nuts vertically through the Skadis holes, then as you tighten the screw the T-nut will turn and lock the bottle holder to the board.

You can find and download the matching T-nut here: Skadis T-nut for M3 screw.

Printing and print settings

The best way to print the drill bottle holder is flat on the bottom side. In the model files, parts are oriented in the best printing direction. Use PLA for printing with a layer height of 0.2mm or less and a nozzle width of 0.4mm or less. A wall thickness of at least 3 lines and an infill of 25%. A support structure for the screw hole are recommended for the printing. 

More of my models

You might be interested in some of my other models.

Skadis hook set 

Click here if you are interested in seeing more of my models for IKEA Skådis board. 

Feedback is always a good thing.  To encourage me or other designers to make more models, hit like and/or post your makes. If something doesn't work or is missing and can be improved, please leave a comment.