
Nắp Che Lỗ Hổng Phía Sau Máy XL
Remix of Prusa XL - EnXLosure By Voxel3D
- Downloads
- 100
- Likes
- 14
- Views
- 517
- Remixes
- 0
- Comments
- 0
Files 5 577.6 KB
- Back_Cover_1766931377.stlSTL · 142.7 KB
- Back_Cover_with_Head_1766931378.stlSTL · 119.1 KB
- Back_Cover_Antenna_1766931379.stlSTL · 97.2 KB
- Back_Cover_Antenna_with_Head_1766931380.stlSTL · 97.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #181694
- Category
- Máy In 3D
- Published
Description
Neither Prusa's XL Enclosure nor @Voxel3D's enXLosure cover the big gap at the back of the printer. These simple covers solve that shortcoming so more heat is kept in the enclosure.
They are easy to print. I used 0.6mm extrusion width and 0% infill.
Simple pieces, held on by magnets. You'll need 5 pieces. There's a combination for all XL's.
5-head XL:
- 4x Back Cover with Head
- 1x Back Cover Antenna with Head (unless your antenna is on the side)
Dual-head:
- 2x Back Cover with Head
- 1x Back Cover Antenna (unless your antenna is on the side)
- 2x Back Cover
Single head
- 4x Back Cover
- 1x Back Cover Antenna (unless your antenna is on the side)
You'll also need 4-6 magnets (8mm x 3mm) for each cover (24 to 28).
(In the photos the white ones were test prints so they are easier to see)
Print spec
- Formats
- 3mfstl
- Model files
- 5
- Total size
- 577.6 KB
- Largest file
- 142.7 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -
New -

-

-

-

-

-


