
Bộ Khóa Giắc Cắm Dupont
- Downloads
- 1,026
- Likes
- 249
- Views
- 4,771
- Remixes
- 1
- Comments
- 0
Files 24 298 KB
- dupont-cable-lock-inner-5_14mm.stlSTL · 8.3 KB
- dupont-cable-lock-outer-5_14mm.stlSTL · 13.9 KB
- dupont-cable-lock-inner-1_14mm.stlSTL · 8.7 KB
- dupont-cable-lock-outer-1_14mm.stlSTL · 12.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #180226
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
This is dupont connector lock for 1-6 pins. There are variants for 12 and 14mm dupont connector.
Initially I used PLA, but the connector is fragile and propably wont withstand reusing. PETG is more suitable, because it is more flexible and wont brake easily.
However, if you dont have petg, printing the outer piece standing in vase mode in pla is good compromise- the layer adhesion is better than printing vertical without vase mode and it has quite good amount of flexibility.
If you are using single dupont connectors, i recommend using zip-ties for both ends for better rigidity.
Updates:
- 5.6.2022
- The fit of the dupont connector to the inner part is now bigger by 0.4mm, the fit was previously too tight.
- Single connector added.
- 14.6.2022
- 6 pin versions added
This is remix of https://www.printables.com/cs/model/115485-bltouch-connector-lock. I added options for different number of wires. I also use bigger clearance betwen outer and inner part.
Print spec
- Formats
- stl
- Model files
- 24
- Total size
- 298 KB
- Largest file
- 21 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-
New


