Skip to main content
F3D
Fidget Spinner In Tại Chỗ 1

1 image

Đồ Chơi Khác

Fidget Spinner In Tại Chỗ

By LV3D

Downloads
151
Likes
19
Views
435

Files 1 1.7 MB

  • Fidget_spinner_1766775978.stlSTL · 1.7 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#179783
Published

Description

This simple and clean fidget spinner is designed to be print-in-place, so it prints fully assembled and ready to spin — no extra assembly or hardware required!

✅ Features

Fully 3D printable in one piece

Functional bearing with integrated balls

Minimalist, modern design

Great for stress relief and fun

⚙ Print recommendations

Material: PLA or PETG

Layer height: 0.2 mm (or finer for smoother movement)

No supports needed

2-3x walls

20% infill recommended for extra strength (optional)

Make sure your print bed is properly cleaned to ensure good adhesion and avoid print failures

If your first layer isn’t perfectly calibrated, consider increasing the elephant foot compensation slightly to prevent the bottom edges from fusing and blocking movement

💡 Tip

After printing, gently loosen the moving parts — you can also add a tiny bit of lubricant if you'd like it to spin even more smoothly.

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
1.7 MB
Largest file
1.7 MB

0 comments

See all