Hello Kitty phát sáng đèn LED hoặc WLED

Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.
https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all-

You are doing me a big favor by clicking the Like button :-)

Shopping list for use with WS2812B leds
WS2812B RGBW Led (AliExpress) (Not the RGB. The RGBW W is for cool white)
Wemos D1 Mini V3.0.0 (AliExpress)
Wire thin 28AWG (AliExpress)
Black Filament - Sunlu Black
Warm white Filament – E-Sun white-B (Not Snowwhite)
Solder tin
Glue
5 Volt usb micro adapter

Print Hello Kitty in black or other non-translucent color.
Diffuser warm white or white, for example, Esun white-b.
Print only the parts that you need.

Put some glue on de edge of the lens, and place the lens in the letter press firmly.

If there is a mistake let me know and I fix it.
For questions send me a message. I would like to help you make this beautiful project ;-)
 

Programming the Wemos
its very simple, look here:
https://kno.wled.ge/basics/install-binary/
Metthod 3: ESP Home Flasher tool

Link to the flasher:
https://github.com/esphome/esphome-flasher/releases

Link to the bin file:
https://github.com/Aircoookie/WLED/releases

Open the ESPHome-Flasher-1.4.0-Windows-x64.exe
1. Choose the comport that your WEMOS is on
2. Browse in the flasher to WLED_****.bin
3. Click on Flash Esp

Thats it

If you don't want to use the WS2812B, you can also use a normal diffused 5 mm LEDs. 
An adapter is included for this.

In my previous project there are pictures about the LEDs and the connections:
https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n