
Thanh treo mini cho tủ quần áo IKEA KLEPPSTAD
- Downloads
- 17
- Likes
- 0
- Views
- 334
- Remixes
- 0
- Comments
- 0
Files 3 1.2 MB
- IKEA_wardrobe_mini_rod_easy_print_-_low_poly_1766689102.stlSTL · 40.4 KB
- IKEA_wardrobe_mini_rod_easy_print_1766689102.stlSTL · 591.3 KB
- IKEA_wardrobe_mini_rod_1766689103.stlSTL · 546.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #17928
- Category
- Đồ Gia Dụng
- Published
Description
This is for making use of the extra space on either side of my new kleppstad wardrobe from IKEA. It could also be used on the inside with a similar or same screw as the ones used to mount the rod that comes with this wardrobe.
I used 2x small screws from a package of IKEA screws and a couple of M5 40mm socket head cap screws and a matching nut. Probably only need about a 35mm one or smaller.
In order to make it stronger I printed it laying flat and I made a version of the model that is flat on the side to allow for this. You can also print it standing if you need it to look cleaner. But beware that it may break under load along the print lines unless you have very good layer adhesion.
My print is in PETG, don't mind the messiness on mine, this is due to my print settings not being perfect and I just needed to make a quick part before it got too late in the day to complete the work.
Enjoy!
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 1.2 MB
- Largest file
- 591.3 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -
New -

-

-
New -

-


