Hộp Mê Cung Trứng - Da Dệt

This egg has a snakeskin like texture on the surface, sort of a warped weave pattern. The maze is medium difficulty with mostly shorter dead-ends. If you want to close it so the pattern lines up, you may have to solve it several times to get it right as there are three possible starting positions.

It is designed to be printed without supports, but depending on your printer, you may need supports for the steepest parts of the bottom half.

Printing

0.4mm nozzle
0.16mm layer height
2-3 perimeters
15% infill (only needed for the first 22mm of the bottom half and above 52mm of the top half.)
I like to set the Top Fill Pattern and the Bottom Fill Pattern to Concentric.

The print pictured had Fuzzy Skin applied to select parts of the weave to enhance the appearance of the textures.