Vỏ cho Module Kích Nguồn USB-C PD

BOM

Part

Photo

M2x10 or M2x12 screws, self-tapping, countersunk

• src 1
• src 2
• src 3, assorted
• src 4, assorted

4

USB-C PD Trigger Board with DIP Switches

• amazon.com
  • src 1, verified
  • src 2
  • src 3
  • src 4
• aliexpress.us
  • src 1 
  • src 2
  • src 3

1

Printing

No supports needed.  Use 2 or 3 walls.  15% infill should be fine.

Assembly

Step

Photo

Use flush cutters to cut the through-hole pins of the bottom of the board (don't remove the chip or other SMD components).

Place the board into the case bottom.

Set the case top into place.

Screw in the four M2 screws.

[Optional] Embellish your case with a laser engraving or a label!

Configure your desired voltage.

I've found that many of these boards have different pin settings so make sure you double check these with a multimeter. For mine, here's the configuration

Voltage

p1

p2

p3

5V

0

0

0

9V

1

1

1

12V

1

1

0

15V

1

0

0

20V

1

0

1

CAD

Feel free to take a look at the CAD on Onhape.  You should be able to fork from my design, or export to use in your CAD program of choice.