Phần tháo bộ lọc Nâng cao CORE One dễ dàng

If you want to add option to your CORE One Advanced Filtration unit to easily take it off, this model will be right for you. I wanted to have something to quickly and easily remove the filter, so I remixed the version for easy remove of the filter by sliding it down.

It is from four parts - inner parts, outer parts and “plates” for easy printing without supports.

Besides filament you will need at least 8, better 12 screws (bottom and second from top are not that needed) - M3x10mm are the best one in that case.

I suggest printing that atleast from PETG.

I printed that from PETG, 0.4mm Nozzle, 0.20mm STRUCTURAL profile. All parts are oriented to print it right away, no supports needed.

Thanks to looping-74 for help me out to make the system more reliable.

Thanks to Peter Larsen to point out, that it should be better to make the holes for screws through, so the “waste” material from thread could leave the hole. You can decide, which version you want, I upload both of them.

Not relevant for this mod as it seems during the conversation in github issue, see more below
From FW 6.4.X (?) it will be possible via G-Code to “turn on/off” the Advanced Filtration system.