Hộp Đựng Đồ Để Bàn (Có 4 Kiểu)

Here is desktop storage box that I made for everyone. It comes in four styles. Choose according to personal preference. Hope you will like it and be useful to you. (Another Model)

Tip:

It should be noted that, You'd better to use tools to remove the burrs after printing is completed.(as shown in the figure) )After installing the blinds, slide them several times to make sure they move smoothly. 

this model was printed using PLA. (fill in 10%，using a lower layer high (0.2mm)，no support)