Đèn Bàn Phong Cách Steampunk

Steampunk style desk lamp.

I build this model, after that i modify the some parts to make it better. So the final model is slightly different from the photo.

I use a standard E27 fitting from a DIY shop, why would you make it yourself, and it’s a safe solution.

The crown nuts are adjustable so they can fit nice to the bulb.

Use the cones if you like the spiral shape wires, glue them where you like.

I glue a lever on the rocker switch, i couldn't find a suitable switch.

After printing i paint the parts with Hammerite Ultima Gold. (It has no, or very few, solvents).

Instead of a rocker switch replace the cover of the junction box by a HIGH VOLTAGE cover. You can do the same with the dial front.

Use the parts you like and build your own version.

You also need:

E27 85mm bulb LED (from a local DIY shop).

A wire with plug.

Rocker switch build in size 13x19mm (from a electronica shop).

Hex Standoff male-female M3x8, 4 pieces (from a electronica shop).

Tap M3, M4 and M5

Several M3 bolts.

M5 bolts or thread rod and nuts.

M4 thread rod and nuts.

M5x10 bolts or screws for decorate the feet. (Or screw them on your desk).

Hard plastic glue.

Paint.