Kẹp giữ sợi Filament
Bytinx_1344834Likes1.2KDownloads6K
Máy In 3D
Sửa Lỗi Lỏng Thanh Nối Trục Đùn Nhựa Máy SV08
- Downloads
- 1,894
- Likes
- 290
- Views
- 10,135
- Remixes
- 0
- Comments
- 0
Files 3 957.4 KB
- hotend_fix_1766340253.stlSTL · 256.8 KB
- hotend_fix_split_1766340254.stlSTL · 514.8 KB
- hotend_fix_no_supports._1766340255.stlSTL · 185.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #172396
- Category
- Máy In 3D
- Published
Description
The rod that goes into the extruder idler gear on the extruder arm likes to come loose. this will fix that. i have to push my pin back in after long prints or i end up with extreme under extrusion. this keeps the pin from getting to that point.
I printed it in PLA, but would suggest something stranger just because of the location and heat. have not had any issues after adding this.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 957.4 KB
- Largest file
- 514.8 KB
0 comments
You may also like 12 models
See all-
-
Kẹp nhựa mini (thêm một mẫu kẹp sợi filament khác)
ByreddLikes216Downloads2.1K -
Ke góc dành cho nhôm định hình 2020
ByJasonOlliff_519145Likes241Downloads2K -
Khay Đựng Hạt Hút Ẩm Cho Lõi Cuộn SUNLU Spool
Byarhi_585078Likes64Downloads535 -
Phụ kiện đinh gai 3D cho giày Crocs - Tự tay tạo phong cách cá tính
ByHanzo3dLikes155Downloads410 -
Dụng cụ hỗ trợ rút trục X (X-axis Rod Puller)
ByGeek5DLikes147Downloads480 -
V5 Toolhead cho SV08 & Voron – Hỗ trợ Hotend CN3D HF (Đồng thau & Đồng mạ Niken)
ByNadirLikes25Downloads110 -
Dụng cụ cạo bàn in / ron (Gasket Scraper) nhỏ gọn
ByBrokentooth_designsLikes23Downloads401 -
Tay nắm cửa cho bộ khung Prusa IKEA LACK V2 từ 3D Sourcerer
By3DSourcererLikes48Downloads372 -
Bản mod xích dẫn cáp (Drag Chain) cho Rat Rig V-Core 3
ByWyomingWolf_261196Likes52Downloads422 -
Nắp che đầu in Sovol SV08 Mk5
Byeoyilmaz_384382Likes17Downloads92 -
Máng Hứng Nhựa Thừa V3 cho Flashforge Creator 5 - Bản Xả Phía Sau
Bytopronix_2170418Likes41Downloads292
