
Nâng cấp Hộp chống ẩm cho Prusa Core One
- Downloads
- 677
- Likes
- 498
- Views
- 9,611
- Remixes
- 6
- Comments
- 0
Files 20 28.8 MB
- connector_right_1766337252.stlSTL · 105 KB
- Frame_upper_left_1766337253.stlSTL · 178.4 KB
- corner_upper_left_1766337254.stlSTL · 111.8 KB
- corner_lower_right_1766337254.stlSTL · 111.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 6
Dụng cụ hỗ trợ bắt ốc bảng bên hông cho Prusa CORE OneBybzed · 06/06/2026
Prusa CORE One+ Drybox kèm External Loader (nạp cuộn ngoài, cửa dùng latch)ByNerfygeko_4140350 · 05/08/2026
Bản lề tùy chỉnh cho nâng cấp Drybox Prusa Core One của HaasiByAnthonyCoombe_681572 · 03/16/2026
Hộp Hút Ẩm (Desiccant Box) Dễ In HơnBySTX_4050015 · 03/12/2026
Details
- Model ID
- #172308
- Category
- Máy In 3D
- Published
Description
5 of six walls are already there, lets add one more.
Dont forget to seal the corners an the hole on the printers frame.
Silicone should be a good choice.
Also available:
-a ring to stick a led strip on. For lighting the spool from behind. Uses 3 of the same magnets. NOTE: it does prohibit the use of wider spools, like e.g. the bambu spools
-Silica gel container. Uses 5 of the same magnets.
Order of installation:
1. Press the frame together
2. Press in Magnets (use a dab of glue)
3. Insert square nuts
4. Install connectors and corners on one side of the frame (do not tighten bolts at this point; use correct position)
5. Insert Plexiglass
6. Install the rest of the connectors and corners
7. Tighten bolts
8. Install seal on surface over the bolt heads.
9. Install pivotpoints on the printer using the 3 existing rivet holes. Secure bolts with locking nuta. Needle nose pliers recommended.
10. Connect door to pivots using the M3x30 bolts. No nut needed, if inserted from the top
Material:
Seal: 10mm width, 6mm thickness (easily compressible) e.g. https://de.aliexpress.com/item/1005008002213187.html?gatewayAdapt=glo2deu
M3x6 28x
M3x10 3x
M3 locking nut 3x
M3 square nut 28x
M3x30 3x
Plexiglass e.g. 300x300x3mm https://www.ebay.de/itm/365443565666?var=635242369327&_trksid=p4375194.c101949.m162918
Neodym Magnets round 10x3mm 12x
Print spec
- Formats
- 3mfstepstl
- Model files
- 20
- Total size
- 28.8 MB
- Largest file
- 19.4 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -

-

-
New -
New -

-


