Kẹp Túi có Nắp Vặn

The Bag Clip with Screw Cap designed by Minkix ist great. However there are some Things I wanted a bit different, so i constructed it by myself.

It works best if you print Cap and Insert at 99,5% and the Clamp at 100,5%

Version 1.4
It doesn't work at the moment, I'm currently working on the swivel.
Printing a test print right now..... (10.01.2020)

Version 1.5
Swivel is now working, after changing the geometry. But its a bit lose, changing it again.
Printing a test print right now..... (11.01.2020)

Version 1.8
Now everything is working as intended (18.02.2020)

Print instructions

Unassociated tags: Bag Clip

Category: 3D Printing Summary

The Bag Clip with Screw Cap designed by Minkix ist great. However there are some Things I wanted a bit different, so i constructed it by myself.

It works best if you print Cap and Insert at 99,5% and the Clamp at 100,5%

Version 1.4
It doesn't work at the moment, I'm currently working on the swivel.
Printing a test print right now..... (10.01.2020)

Version 1.5
Swivel is now working, after changing the geometry. But its a bit lose, changing it again.
Printing a test print right now..... (11.01.2020)

Version 1.8
Now everything is working as intended (18.02.2020)

Print Settings

Rafts:

Doesn't Matter

Supports:

No

**Resolution:**

0,18

Notes:

Everything has to be rotated -90° around X