Nhiều loại Móc treo cho Slatwall 3"

An assortment of hooks for standard 3" Slatwall such as storeWall.  All of these are based on the same base model that clips nicely into the Slatwall so that your hook won't pull out but can still be slid around if needed.

Note that I have only tested with storeWall as that is the system I personally have, but in theory this should work for most 3" Slatwall if the dimensions are close enough.  I'm totally open to any feedback or suggestions for more accessories to add to the collection, and I have provided the base model that I use in STEP format to facilitate remixes.  I'm hoping to help build a large and cheap library of accessories for Slatwall.

I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but you should file the little latching nub down as needed to avoid any damage.  Don't force it onto your wall if you feel too much resistance.

These must be printed with supports and on their sides for strength.  If you have good build surface adhesion you can get away without a brim, but the little thin part that latches up into the Slatwall has a tendency to warp and pull away from the build surface.

Get 25% off CA Filament by using the following link:  http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D