QuadBee - Bảo Vệ Tổ Quốc Của Bạn!

Stand with Ukraine!

Any and all hardware and drone assembled from donations made to me in this project will be donated to Ukraine after they are built and tested.
 

I would like to thank everyone that has donated.  
Below is the number of drones that has been received by the Ukrainian forces.

Drones sent to Ukraine!

26

How to support?

If you would like to support the project and enable me to buy new components for new designs.
Please donate any amount here

• Join my club as a Peeky Blinder supporter
• Donate through PayPal

Introduction

After the Ukrainian army successfully has used and deployed thousands of drones. 
I want to enable regular people to learn and prepare themselves.
Homemade drones are very effective, and using 3d-printers has been absolutely crucial for the Ukrainian army.
Both out in the field, but also for educational use. 

My goal is to enable regular people to build their own drones. 
Either for fun, for the FPV experience or to prepare and further build another tool that can be used. 
Either defensively but also for reconnaissance

Print guideline

Here are print guidelines for you to follow in order to have decent success with printing parts:

Infill type

Gyroid, Honeycomb, Triangle or Cubic

Material

PCCF, PACF, ASA, ABS, PCTG, PETG, (TPU for Antenna Brackets)

Infill percentage

35% 

Layer height

0.2mm, recommended

Wall count

Recommended: 4

Solid top/bottom layers

Recommended: 5

Extrusion width

0.4mm, recommended

Tools

Needed or good to have tools for this project.

Soldering Iron TS101

Aliexpress Link

Amazon Link

(Recommended)

Heat Inset Tip Kit - For TS101

Aliexpress Link

Amazon Link

(Recommended)

Electric Precision Screwdriver 

Aliexpress Link

Amazon Link

(Recommended)

Allen Key Set

Aliexpress Link

Amazon Link

Torx Key Set

Aliexpress Link

Amazon Link

Torque Screwdriver

Aliexpress Link

Amazon Link

Wire stripper

Aliexpress Link

Amazon Link

Wire cutter

Aliexpress Link

Amazon Link

Heat Insert Press Tool

Aliexpress Link

Amazon Link

Crimp Tool

Aliexpress Link

Amazon Link

Soldering Iron - Generic (Alternative)

Aliexpress Link

Amazon Link

Budget friendly alternative

Heat insert tip - set (Alternative)

Aliexpress Link

Amazon Link

Budget friendly alternative

Precision Screwdriver Set

Aliexpress Link

Amazon Link

Budget friendly alternative

Consumables

Heat insert set

Aliexpress Link

Amazon Link

Wire - Power

Aliexpress Link

Amazon Link

Wire - Communication / Signal

Aliexpress Link

Amazon Link

M3 Button Cap Screw set

Aliexpress Link

Amazon Link

M3 Torx Screw Set

Aliexpress Link

Amazon Link

M3 Socket Head Cap screw set

Aliexpress Link

Amazon Link

Ferrules Set

Aliexpress Link

Amazon Link

Reusable Velcro Cable Ties

Aliexpress Link

Amazon Link

Filament - PC / ASA / ABS / PETG 

Aliexpress Link

Amazon Link

Filament - Engineering Grade Filaments

Aliexpress Link

Amazon Link

Carbon Fibre & High Temp 

Filament - PLA

Aliexpress Link

Amazon Link

Filament - TPU

Aliexpress Link

Amazon Link

Goals:

I have set out a couple of goals.
Any designs that I make in this project will be uploaded as variants and open to anyone to use.
But I lack the electronics and hardware and rely heavily on donations to test it.
There's just so far you can come in CAD alone.
For obvious reasons I can't share the CAD-files that is used today in field. 
There's a need to make new designs.

I would like to do the following in the short/medium term future:

• Develop and share a new payload system.  (There are complete payload units listed in the BOM)
• Develop and build variants that can handle different types of payload
• Develop and build a variant that can be used to transport medical supplies including medicine that
• needs to be kept refrigerated
• Develop and build variants for other purposes - Mine detection etc
• Streamline the enclosures to give it at least IP2x