Bông Tai Cây Sự Sống

There are two versions you can print. The first is the original .25mm version that requires a .25mm nozzle. But if you don't have a .25mm or you just prefer .4mm nozzles, you can print the .4mm version.

This design is very scalable, so feel free to scale it to whatever you like. I would be carful about scaling it down, just make sure it doesn't leave gaps in the branches.

Layer height doesn't really matter, .10 mm for best results.

No supports required.

The .25mm version is 45x49x4mm

The .4mm version is 119x64.5x4mm

Happy Printing!

You might like some of these earrings as well.