Ngàm PUG WWBMG-4AT Tucked

Made for the a4t-wwbmg dual sensor extruder - untested with other versions of WWBMG.  (Sherpa mini spacing)

Made for the a4t-wwbmg dual sensor extruder - untested with other versions of WWBMG. 

Either too high or too wide - Its diabolical how most PUG mounts for wwbmg just slaps the mount on the toolhead body like a new arm with as much protrusion as possible. 

So here is my attempt to minimize the additional footprint while maximizing strain relief!
WWBMG shifts the extruder motor to the left leaving a perfect concavity where the mount can do its thing while being as tucked and tight to the toolhead body as possible

6 m3 heatserts 

Also added 2 lower extruder-carriage reinforcement mounts - uses ~25mm m3 shcs.
18mm of space to the cowling, CNC Xol mount is 3mm - will need  15mm spacer to prevent warping the motorplate. Just snug, do not overtighten without spacer.