Skip to main content
F3D
Giá đỡ đồng hồ Gridfinity với đế 1 x 2 chuẩn 42mm
Trang Phục - Phụ Kiện

Giá đỡ đồng hồ Gridfinity với đế 1 x 2 chuẩn 42mm

By CooterBaldwin

Remixes
1

Files 6 7.1 MB

  • Watch_Stand_0.6n_0.3mm_PETG_MK3S_1h34m_1766383181.gcodeGCODE · 3.3 MB
  • WatchStandShort_0.6n_0.3mm_PETG_MK3S_1h28m_1766383182.gcodeGCODE · 3.2 MB
  • Watch_Stand_1766383177.3mf3MF · 55.1 KB
  • WatchStandv7_1766383178.f3dF3D · 265.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Simple, no bells, no whistles watch stand with a base compatible with Zack Freedman's Gridfinity System.

Fits in a 1x2 standard 42mm Gridfinity space. When configured for a 7.25" (18.5 cm) “wrist” it is roughly 42x84x84mm. No holes for magnets or screws on the base.

Design

Designed in Fusion 360 (.f3d in downloads). I tried to keep it as parametric as possible. You'll want to change the circumference setting according to your wrist size.

A word of warning for anyone modifying the F3D file: as far as I know the design of the Gridfinity base is spot on except for the magnet locations in ‘Cell Bottom’ sketch. When I created the sketch I was using non-standard sized magnets and shifted the locations around a bit. Maybe one of these days I'll convert it to full Gridfinity standard.

Printing

Printed in Atomic Filament Light Gray PETG PRO on a Prusa MK3S with Revo V6 hot-end and 0.6mm nozzle. Sliced in Prusa Slicer 2.5.0, 0.3mm layer height using the Generic PETG profile. Supports are required for the build plate side of the base. I used the following support settings:

  • Generate support material - Yes
  • Auto generated supports - Yes
  • Style: Snug
  • Support on build plate only - Yes

The supported edges were not pretty and they needed a bit of touch up with a hobby knife but I couldn't come up with any way to print this without supports.

Changes/Sizes

Anyone that would like a different size but doesn't have Fusion 360, comment or message me and I'll get you a modified 3MF file. Also if anyone would like to see this design with magnets (not sure if it's a good idea for mechanical watches) or screw holes, let me know and I'll see what I can do.

Update 2023-11-04

New, shorter version available as requested by @Jamboooy_679715. The riser arm is ½ the height of the original which drops the overall height by 14mm (0.55").

Read more Show less

Print spec

Formats
3mff3dgcode
Model files
6
Total size
7.1 MB
Largest file
3.3 MB

0 comments

See all