Chân đế Gridfinity 2x4 cho Trạm hàn Hakko/Zhaoxin 936

About

Gridfinity 2x4 Stand for Zhaoxin Soldering Station. I used Cover - 2x2 - atucom.stl as a base (can't find now the source, though, also 2x4 was somewhat broken so I readjusted two 2x2). On the photos you can see Zhaoxin Soldering Station 936DH. I believe it should also be compatible with some Hakko 936 stations as well ( not tested).

Stand dimensions are 151x72mm.
Magnets 6x2mm

Please like, create makes and add comments also to the original model, thanks!

Changelog

• 2025.10.26 - initial release

Print

• provided gcode is just for time and material estimations

• 0.2mm PETG 0.4 nozzle

• no brim, no supports, no skirt

Assembly

• print

• add magnets 6x2mm

• you can use hot air to bend the two thin walls on the side to clamp the stand in place, but I suggest using hot glue in the corners.