
Con lăn Prusa XL theo biên dạng mới
Remix of Giá đỡ dây tóc Prusa XL có bạc đạn By bomtarnes_700
- Downloads
- 0
- Likes
- 0
- Views
- 70
- Remixes
- 0
- Comments
- 0
Files 4 4.6 MB
- roller_v2a_1766177616.stlSTL · 3.9 MB
- roller_v2b_1766177617.stlSTL · 361.3 KB
- project1_PETG_v8_1766177618.3mf3MF · 376.2 KB
- roller_v2_1766177619.scadSCAD · 4.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #166908
- Category
- Máy In 3D
- Published
Description
I changed the roller to a profiled roller (using the longer base housing). Likewise, it is designed to be printed vertically so no supports are needed. The pointy peg press-fits into the roller (push hard to get it in all the way). For the roller, a glue stick is required since there intentionally is no brim.
My OpenSCAD and STL files are attached. In the *.3mf file, the objects are separate so you can print just the ones that you need.
In my case, I used PETG and the press-fit the pointy peg for the roller is 98% of the hole size. If you use a different printer or different material, you might need to scale the pegs just a tad.
For other details, please see my remix here which describes the modifications beyond just the roller:
https://www.printables.com/model/1517416-prusa-xl-filament-roller-sumo-enclosure-remix-prof
Print spec
- Formats
- 3mfscadstl
- Model files
- 4
- Total size
- 4.6 MB
- Largest file
- 3.9 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-

