Đuôi xe Buell Tail Tidy

Hey there guys,

Wasn't able to find a short tail using the original brake light, so here it is. Is far from being perfect as the scan I borrowed was used for scanning already a modified tail, but it does the trick pretty well!

It fits the original brake light, used 2x4mm insert nuts to hold it in place and 2x4x25mm screws

For holding the plate holder bumper I used 5mm bolts with security nuts

Its made of PETG but I sanded it, primed it and painted it (not necessary in general, but with my machine was a step I wanted to add) and added an inox reinforcement for the subchasis load (see pictures)

I printed it in 2 parts so it was lying flat and with minimal supports on +60º, but there's also the full file uploaded.

4 perimeters

50% cubic subdivisional infill

In a separate link I'll upload the plate/blinkers holder. https://www.printables.com/model/1518518-plate-holder

https://www.printables.com/model/1518530-plate-holder-bumper

Feel free and MORE than welcome to tip me if you feel like, but all in all enjoy the print and upload your make if any! https://ko-fi.com/p3dx3d