Giá Đỡ Spool Cho Core One (Bản Chỉnh Sửa)

Printing Flex on the Core One is not a walk in the park. Getting the spool on top seems to help, but I didn't find a spoolholder that could be installed and removed easily, and allow keeping the MMU3 in place.

So I modified the original model for the MK4.

Printed in PETG, 0.4mm nozzle, 0.2mm layers, 4 perimeters, 20% infill. Even though it's not a huge print, you might want to test your profile by printing only the bottom part to make sure it's a tight fit. This is easily done with the slicer.