Connect Four Cỡ Nhỏ

I made a smaller version of the classic game Connect Four (44 x 48 x 6 mm). Printed using a 0.2mm nozzle. I even tried scaling this one to x0.6, and it still worked, but at that point, the chips stopped being easily pickable. Of course, if you wish, scale it up and use it as a normal one.

It consists of four parts: the double basket, the hole part with ribs, the flat hole part, and one chip. When printing, don't forget to add supports on the edges of the bottom part of the basket (check the image); the middle part is fine with bridging. For the assembly, put the hole part with ribs on the basket (check that it really sits below the side protrusions) and put a few tiny drops of super glue on the ribs and glue the flat hole part onto it. Print up to 15 chips of each color and enjoy the game.

There are small pegs on the side of the basket to help keep the top "closed", but I would recommend using a rubber band around it.