Hunllef - OSRS (Mô hình 3D)

Came out lovely but took a lot of tinkering with slicer settings and supports.
I used organic supports with a minimum width of 4 and painted extra supports on the tips of the tail and the teeth(!!). Very important to make sure there's no floating parts of the model which the default settings in prusaslicer might end up generating.
It might end up generating a support in the mouth, that worked out nicely for me but I had to use a pair of tweezers to pull the scraps out of the mouth.

Another important thing is to sink the model ever so slightly down into the build plate and generate brims on the feet, otherwise you'll have floating geometry that's hard to print. Watch out removing the brims especially on the front right foot, the connections for the toes are very thin and I may have slightly dislocated one (sorry crystal deer friend)

I have more clean up to do but there was very little scaring from the organic supports.

Printed with 5% gyroid infill to make it more translucent. If you want a cleaner top of the model use more infill.

Used "Inland 1.75mm PLA Translucent 3D Printer Filament Seasons Gradient Color Blue/White SKU: 646182"