Skip to main content
F3D
Chân đế cho thanh nhôm LED dạng tham số 1

2 images

Đồ Gia Dụng

Chân đế cho thanh nhôm LED dạng tham số

By pjvenda

Views
51

Files 9 1.2 MB

  • support_10mm_flat_1766158686.stlSTL · 98.3 KB
  • support_15mm_flat_1766158687.stlSTL · 98.3 KB
  • support_30mm_flat_1766158687.stlSTL · 123.1 KB
  • support_59mm_flat_1766158688.stlSTL · 123.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I wanted to hold a LED strip behind my TV at a specific height, so I modelled the aluminium extrusion I had and modelled a support that held it in place. After a few experiments, I achieved a good tolerance.

It is unlikely that you could use this model for your own aluminium extrusion or specific height, but I left the source code so that you could remodel the extrusion profile, the supports and select a new height and weight/material reduction hole.

For a strip of 1.2m, I used 4 supports stuck with velcro to the back of the TV.

Printing was dead-easy - PLA, 0.20mm layer height, cubic infill, 4 perimeters should be plenty strong.

Read more Show less

Print spec

Formats
fcstdstepstl
Model files
9
Total size
1.2 MB
Largest file
166.9 KB

0 comments

See all