Cầu Nối Hai Làn Xe Hot Wheels Cái

Stabilize and connect two tracks side by side. Requires 4 male standard Hot Wheels connectors to connect track together. 

The Built in Supports to this dual lane connector bridge snap/break off easily with pliers or even your fingers depending on the material. Print profile provided for optimal printing. 

PRINT SETTINGS

PETG - 0.18 layer height on 0.6 (or 0.4) nozzle, 15% gyroid infill, 2-3 walls, 2-3 top layers, IRONING ON ALL TOP SURFACES - at the very least for the inverse support pieces (only 1 layer required for walls/top/bottom layers for support pieces). The 0.25mm gap allows twisting and breaking off the support for like materials (Can use PLA as well, but PETG is more flexible). Works pretty well to break off currently. 

OR

PLA/PETG Mix - Use PLA for the inverse connector pocket bodies. PETG for the main track. I still recommend ironing the top of the supports. 

NOTES

I probably have hundreds of hours perfecting these tracks, with dialed in connector areas and physical printing/testing. No more hokey custom connector pieces. Print with confidence!!

If you like my work, and have seen the Elegoo Centauri Carbon, consider checking it out with my affiliate link below. I purchased one with my own money, but I appreciate the support so I can keep making/reverse engineering cool models. 

https://elegoo.sjv.io/LKyzRo

Alternatively if you're a bambu lab fanboi and love their stuff (like me), or need new parts for your bambu lab machine, consider using my affiliate link to help support me and my work on reverse engineering and crafting models.

https://us.store.bambulab.com/referral/3d-printer?ref=Q5CK92MYJOQO&skr=yes

Purchasing

If you don't have a 3D printer and would like to purchase this item, I would be happy to print and ship it to you. Send me a message at [email protected]. Located in USA but will ship globally if required. Shipping will vary and affect cost.