
Mô hình máy bay Boeing 747-400 tỷ lệ 1:144
- Downloads
- 3,455
- Likes
- 451
- Views
- 13,487
- Remixes
- 0
- Comments
- 23
Files 25 45.5 MB
- Fuselage_Fwd_1766448893.stlSTL · 3.9 MB
- Fuselage_Mid_1766448894.stlSTL · 5.5 MB
- Fuselage_Aft_1766448895.stlSTL · 3.6 MB
- Engine_1_1766448896.stlSTL · 3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #16385
- Category
- Xe Cộ - Máy Móc
- Published
Description
Model description
The 747-400 is a wide-body airliner, an advanced variant of the initial 747. The first 747-400 was rolled out on January 26, 1988, and made its maiden flight on April 29, 1988. It typically accommodates 416 passengers in a three-class layout over a 13,490 km range with its 397 t MTOW.
With 694 747-400’s delivered over the course of 20 years from 1989 to 2009, it was the best-selling 747 variant. Its closest competitors were the smaller McDonnell Douglas MD-11 trijet and Airbus A340 quadjet. In the late 2010s, older 747-400 passenger aircraft were being phased out by airlines in favor of long-range, wide-body twin engine aircraft, such as the 777, 787, and Airbus A350.
Assembly note
The nose landing gear wheels should be connected using a piece of 1,75 mm filament.
Model dimensions
- Length: 47,7 cm
- Wingspan: 44,5 cm
Print settings
- Layer height: 0,2mm
- Outer walls/perimeters: 2
- Bottom layers: 3
- Top layers: 5
- Infill: 0% (except for fuselage fwd.stl, fuselage mid.stl and stand.stl: 25%)
- Minimum layer time: 5 sec
- Perimeter generator: classic (not arachne)
Minimum required print volume is 81x102x180mm.
Please use the following link if you have questions or issues related to this model: https://discord.gg/b4BzJqe6EK
Additional content
- 747-400F: https://ko-fi.com/s/bd7b8bd4b4
- 747-400D: https://ko-fi.com/s/84c4af8b9d
- 747-400M: https://ko-fi.com/s/52406a2585
- Additional engine options: https://ko-fi.com/s/b787a75e6d
- Tilted/extended gear: https://ko-fi.com/s/58262aa0a6
Support
If you like my models, you can support my work in the following ways:
- Make a donation or buy something from my shop: https://ko-fi.com/clerx
- Become a member of the Clerx Discord community: https://discord.gg/hckHHs3waH
Print spec
- Formats
- pdfstl
- Model files
- 25
- Total size
- 45.5 MB
- Largest file
- 5.5 MB


