Skip to main content
F3D
Mô hình máy bay Boeing 787-8 tỷ lệ 1:144
Large file collection Xe Cộ - Máy Móc

Mô hình máy bay Boeing 787-8 tỷ lệ 1:144

By CLERX

Downloads
3,484
Likes
460
Views
11,639
Comments
33

Files 23 35.5 MB

  • Fuselage_Fwd_1766448894.stlSTL · 4.6 MB
  • Fuselage_Aft_1766448895.stlSTL · 3.2 MB
  • Engine_1_-_Left_1766448896.stlSTL · 3.3 MB
  • Engine_2_-_Right_1766448897.stlSTL · 3.3 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Model description

The Boeing 787 is a wide-body, twin engine jet manufactured by Boeing. The 787 is Boeing's most modern and fuel efficient aircraft. It was the first aircraft to rely heavily on composite materials as they make up 50 percent of the primary structure, including the fuselage and wing.

The engine nacelles with their chevron exhaust, reduce the noise levels both outside and inside the cabin, by up to 60%. The aircraft also features raked wingtip to further improve the fuel efficiency. The windows are more than 30 percent larger than those on most similarly sized airplanes.

The first 787 was officially delivered to All Nippon Airways (ANA) on the 25th of September in 2011 at the Boeing Everett factory.

Model dimensions

  • Length: 39,7 cm
  • Wingspan: 42 cm

Print settings

  • Layer height: 0,2mm
  • Outer walls/perimeters: 2
  • Bottom layers: 3
  • Top layers: 5
  • Infill: 0% (except for the stand: 25%)
  • No supports
  • Minimum layer time: 5 sec
  • Perimeter generator: classic (not arachne)

Minimum required print volume is 61x80x199*mm for the 787-8. 
*For printers with a Z-axis shorter than 250mm, use the the split verion of the wing.

Please use the following link if you have questions or issues related to this model: https://discord.gg/GK6GNpN4eg

Additional content

Support

If you like my models, you can support my work in the following ways:

Read more Show less

Print spec

Formats
pdfstl
Model files
23
Total size
35.5 MB
Largest file
4.6 MB

33 comments

See all