Giá đỡ camera Core One cho Logitech C920/C930

I wanted to mount my old Logitech C920 in my new Core One.  I remixed together a corner mount for the Core One and the really excellently-modeled C930-to-gopro adapter by ochm to build this mount.

You'll need to take apart your camera a bit to remove the standard mounting arm and replace it with this mount.  See  https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 for instructions (only through the part where you remove the metal mounting arms)

Cable routing is tricky with this camera; theres a hole in the Filament holder on the core one that will fit a USB-A plug, but not the ferrite core on the camera's cord; there's also a plugged hole on the back that won't quite fit the USB-A plug.  Either of those could be enlarged if you want to get a Dremel out, but I wanted to avoid that.  Instead I ran the cable out one of the gaps where the top rails come to a point (see photo).  This is a little dicey because the cable is quite pinched but it seemed like the easiest thing without cutting into either the steel or the acrylic panels.