
Hộp Lọc Nâng Cao Qidi Plus 4
Remix of Hệ thống lọc tiên tiến Qidi Plus 4 By DarkDoctor
- Downloads
- 183
- Likes
- 34
- Views
- 854
- Remixes
- 0
- Comments
- 0
Files 2 1.2 MB
- AFC_1766148463.3mf3MF · 99.8 KB
- Qidi_Plus_4_Advanced_Filtration_Cartridge_1766148464.stepSTEP · 1.1 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #162880
- Category
- Máy In 3D
- Published
Description
After printing Dark Doctor Studios' great Advanced Filtration System model, I broke one of the front upright arms while removing the slicer-generated organic supports. The supports were harder to remove than I'd anticipated. Admittedly, I could have done a better job configuring the supports, but I was still a little annoyed that I had to use supports at all. So I set out to remix the model to:
- Eliminate the need for slicer-generated supports.
- Reduce some bulk from the model.
- Recover some of the real estate for the activated carbon lost to the inclusion of the HEPA filter.
- Add some cosmetic chamfers to satisfy my aversion to sharp edges.
I printed this using QIDI ABS-GF25, which I really like a lot.
Print the model as already oriented in the .3mf file.
0.4mm nozzle at 0.2mm layer height, 3 perimeters, 5 top solid layers, 4 bottom solid layers, 10% gyroid infill and no generated supports.
Edited (2025/03/06)
The filters I'm using are “BlueStars ILIFE V3s V3s pro V5 V5s V5s HEPA filter Replacement”, which have worked pretty well for me. They can be found here: https://www.amazon.com/dp/B0CK2QT3KW
Print spec
- Formats
- 3mfstep
- Model files
- 2
- Total size
- 1.2 MB
- Largest file
- 1.1 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-


