Vệ sinh Đầu phun Ender 3 v3 KE Cập nhật

NB I made an update on the original so it does not hit the brush when you do a auto bed level.

Now this part

G1 X87 Y-16 Z4 F5000.0 ;Wipe 1G1 X46 Y-16 Z4 F5000.0 ;Wipe 2
G1 X87 Y-16 Z4 F5000.0 ;Wipe 3
G1 X46 Y-16 Z4 F5000.0 ;Wipe 4
G1 X87 Y-19 Z4 F5000.0 ;Wipe 5
G1 X46 Y-19 Z4 F5000.0 ;Wipe 6
G1 X87 Y-19 Z4 F5000.0 ;Wipe 7
G1 X46 Y-19 Z4 F5000.0 ;Wipe 8

looks like this FOR ME.

G1 X87 Y-16 Z1.5 F5000.0 ;Wipe 1G1 X46 Y-16 Z1.5 F5000.0 ;Wipe 2
G1 X87 Y-16 Z1.5 F5000.0 ;Wipe 3
G1 X46 Y-16 Z1.5 F5000.0 ;Wipe 4
G1 X87 Y-19 Z1.5 F5000.0 ;Wipe 5
G1 X46 Y-19 Z1.5 F5000.0 ;Wipe 6
G1 X87 Y-19 Z1.5 F5000.0 ;Wipe 7
G1 X46 Y-19 Z1.5 F5000.0 ;Wipe 8
G1 X87 Y-19 Z1.5 F5000.0 ;Wipe 9

As you see the z height has come down

Start at the code as below and work your way down

I also added a wipe 9 so the head does not go back and pick up the poop again.

Nozzle Cleaner Ender 3 v3 ke

I used the clip side of @AlehandoroVR

https://www.printables.com/model/742343-ender-3-v3-ke-and-se-automatic-nozzle-cleaning-bru

add this to your Startup g-code (This is a start. Z at 4 should be to high and work your way down as above 1.5 worked for me)

PS i use creality and if you go to the ip of your printer you will see where your X, Y and Z is

Have Fun!!!!

M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate

M140 S[bed_temperature_initial_layer_single] ;Set final bed temp
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
M104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp

G1 X1 Y-18 Z3 F5000.0 ;Line up with brush

M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize
M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize

G1 X87 Y-16 Z4 F5000.0 ;Wipe 1
G1 X46 Y-16 Z4 F5000.0 ;Wipe 2
G1 X87 Y-16 Z4 F5000.0 ;Wipe 3
G1 X46 Y-16 Z4 F5000.0 ;Wipe 4
G1 X87 Y-19 Z4 F5000.0 ;Wipe 5
G1 X46 Y-19 Z4 F5000.0 ;Wipe 6
G1 X87 Y-19 Z4 F5000.0 ;Wipe 7
G1 X46 Y-19 Z4 F5000.0 ;Wipe 8

G1 X40 Y-18 Z15 F5000.0 ;Raise to clear brush

G1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position

G1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little
G1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 E-1.0000 F1800 ;Retract a bit

G1 Z2.0 F3000 ;Move Z Axis up

G1 E0.0000 F1800

There is a remake for the SE here:

https://www.printables.com/make/2479913?comment_id=2479913

(Thank you!!!!!)