Skip to main content
F3D
Bộ Ghép Hình Bản Đồ Thế Giới Remix 1

9 images

Large file collection Đồ Chơi Trí Tuệ

Bộ Ghép Hình Bản Đồ Thế Giới Remix

By amatsu

Downloads
251
Likes
43
Views
1,085

Files 28 4 MB

  • Sea_A_1766139383.3mf3MF · 64.8 KB
  • Sea_B_1766139384.3mf3MF · 94.1 KB
  • Sea_C_1766139384.3mf3MF · 98.9 KB
  • Sea_D_1766139385.3mf3MF · 86 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

When assembled, the puzzle measures 900mm x 550mm x 6mm. 
Each piece is randomly assigned one of six colors to ensure that no adjacent pieces have the same color. 
You can also use "Pieces_AllPieces_All" to rearrange them if needed.

To ensure a smooth surface finish, the pieces are printed face-down.

If you have an MMU, you might consider using different colors for the front and back to make it easier to distinguish between them.

The data is already set up for the correct printing orientation.

The case is divided into two sections: one for the sea and one for the puzzle pieces, each with a magnetically sealed lid.
You can also stack the two cases by omitting the “Box_Lid_for SeaPlates.”
A total of 16 magnets (6mm diameter × 3mm thick) are used for the case.

My Print Settings:

  • Material: PLA+
  • Nozzle Diameter: 0.4mm
  • Layer Height: 0.2mm
  • Perimeters: 3
  • Support: None
  • Infill: 20%

パズルを組み立てた時の全体の大きさは900mmx550mmx6mmです。
隣り合わないように、各ピースの色を6色にランダムに設定していますが、
"Pieces_AllPieces_All"を使って、再配置してもいいでしょう。

ピースは表面の見た目をきれいにするために、表側を下にしてプリントします。
MMUを持っている人は、ピースの裏表がわかりやすいように色を変えてもいいかもしれません。
データはすでにプリントする方向にセットされています。
 
ケースは、海用とピース用に分かれていて、それぞれにマグネットで閉まる蓋があります。
“Box_Lid_for SeaPlates”を省いて2つのケースをスタックすることもできます。
ケースのために直径6㎜×厚さ3ミリのマグネットを16個使っています。

私のプリント設定
材料:Pla+
ノズル径:0.4mm
レイヤーピッチ:0.2
外周3 
サポート無
インフィル20%

Read more Show less

Print spec

Formats
3mf
Model files
28
Total size
4 MB
Largest file
927.7 KB

0 comments

See all