
Cái Giữ Đồ Uống Xe Đạp - Hỗ Trợ Lon và Cốc
- Downloads
- 227
- Likes
- 36
- Views
- 1,185
- Remixes
- 1
- Comments
- 0
Files 9 1.8 MB
- Holder_small_1766140379.stlSTL · 259 KB
- Holder_tall_1766140380.stlSTL · 272 KB
- Holder_78mm_1766140381.stlSTL · 278.7 KB
- Clamp_1_32mm_1766140382.stlSTL · 102.2 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #161128
- Category
- Xe Cộ - Máy Móc
- Published
- License
- Standard Digital File License
Description
Fathers days tours are difficult. You need to ride a bicycle and at the same time have a place to store your beverage, but your hands are busy. Suffer no more, because here is the solution - the bike beverage buddy. Hands on driving but have your beverage ready for any stop.
You can use it for:
- Beverages
- Espresso
- Elderflower-Lemonade
- Raspberry-Lemonade
The Clamp is designed with a diameter of 32mm. For smaller handle bars, you need to add some rubber or other padding.
The following materials are needed:
- 2x Screws M5x40 DIN 933 for mounting with tools or
- 2x Screws M5x50 DIN 933 when you want to use the 3D Printed screw-head to mount it by hand
- 1x Screw M5x16 DIN 933 for 32mm brackets or
- 1x Screw M5x20 DIN 933 for 26mm brackets
- 3x Self-Fastening Nut M5 DIN 985
- 3x M5 Washer
Printing Instructions for PLA:
Holder and Clamps:
- Orientation: lay on the side surfaces to improve stability
- Layer-height: 0.2mm
- Infill: 15%
- Supports: no
Screw-Knobs:
- Layer-height: 0.08mm
- Infill: 100%
- Supports: no
- Brim: outer
You can find the model on Makerworld too: https://makerworld.com/en/models/465062
Print spec
- Formats
- stl
- Model files
- 9
- Total size
- 1.8 MB
- Largest file
- 363.7 KB













