Máy kéo kbricks

The kbricks tractor uses a subset of 24 parts of the kbricks construction system and has a functioning steering. The list below shows how often each part needs to be printed.

The following video shows how to assemble the tractor:

Explore more kbricks models on YouTube and Instagram.

NEW: Explore the kbricks 3D builder on MakerBrane.com

Print instructions

Print Settings

Rafts: No

Resolution: 0.15mm

Filament: PLA or PETG

Refer to the kbricks construction system for print instructions and hints on removing embedded support. The following list shows number of instances, recommended color, and specific print settings for each of the parts that is making up the tractor:

• 2 x cube_basic.stl (silver, detect thin walls)
• 2 x cube_1hole.stl (silver, detect thin walls)
• 1 x cube_1hole_open.stl (silver, detect thin walls)
• 3 x cube_smooth.stl (yellow, detect thin walls)
• 2 x cube_l.stl (silver, detect thin walls)
• 4 x prism_45deg.stl (silver)
• 25 x connector_long.stl (silver, brim)
• 25 x connector_short.stl (silver, brim)
• 9 x peg.stl (silver, brim)
• 1 x plate_1hole_rounded.stl (silver)
• 1 x plate3x1_rounded.stl (yellow)
• 2 x beam3_peg_pos1.stl (silver, support on build plate only)
• 1 x axle4.stl (silver)
• 1 x axle7.stl (silver)
• 1 x spook_wheel2_locked.stl (yellow)
• 2 x spoke_wheel4_rim.stl (yellow)
• 2 x spook_wheel3_rim.stl (yellow)
• 1 x gear1.stl (silver)
• 1 x bevel_gear_90deg.stl (silver)
• 1 x bevel_gear_90deg_short.stl (yellow)
• 1 x gear_rack6.stl (silver)
• 1 x steering6.stl (silver)
• 1 x seat.stl (yellow, detect thin walls)
• 9 x axle_ring.stl (silver)